BSPBZ - INDUSTRIAL OIL 100

  • MSDS: BSPBZ
  • Manufacturer: AMOCO OIL CO
  • Product Name: INDUSTRIAL OIL 100
  • National Stock Number: 9150-00F031764
Product Identification

Product ID:INDUSTRIAL OIL 100
MSDS Date:10/18/1989
FSC:9150
NIIN:00F031764
MSDS Number: BSPBZ

Responsible Party
AMOCO OIL CO
200 E RANDOLPH DR
CHICAGO, IL 60601-6401
US

Emergency Phone: 800-447-8735

Info Phone: 312-856-3907

Preparer: G.I. BRESNICK

Cage: 15958

Contractor
AMOCO OIL CO
CHICAGO, IL 60601-6401 US

Telephone: 800 447-8735

Cage: 15958

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY

CAS: 64741-88-4

RTECS: PY8040500

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM


SOLVENT REFINED HYDROTREATED HEAVY PARAFFINIC DISTILLATE,

CAS: 64742-54-7

RTECS: PY8035500

OSHA PEL 5 MG/CUM (MIST)

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT): >5 G/KG SIMILAR PRODUCT
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE

First Aid

First Aid:EYES: FLUSH W/WATER. SKIN: WASH W/SOAP & WATER. INHALATION:
GET MEDICAL ATTENTION. INGESTION: INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:COC
Flash Point:450F
Extinguishing Media:DRY CHEMICAL, CO2, FOAM, STEAM, WATER FOG,
HALOGENATED AGENTS

Accidental Release

Spill Release Procedures:PREVENT SPREADING BY DIKING, DITCHING OR
ABSORBING ON INERT MATERIALS. KEEP OUT OF SEWERS & WATERWAYS.

Exposure Controls

Ventilation:ADEQUATE
Protective Gloves:AS REQUIRED
Eye Protection:AS REQUIRED
Supplemental Safety and Health
VISCOSITY:95-105 CST @40C.

Chemical Properties

Spec Gravity:0.88
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOW-ORANGE OILY LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE W/FEDERAL, STATE
& LOCAL REGULATIONS. ENCLOSED CONTROLLED INCINERATION IS
RECOMMENDED UNLESS DIRECTED OTHERWISE BY APPLICABLE ORDIANCES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.